Plan to 3D
Description
What it does
- Reads a 2D drawing such as a floor plan, site plan or part profile.
- Builds a 3D model you can open, rotate and use.
- Makes a preview image you can share or post.
- Gives approximate quantities to help early estimates.
Who it's for
- Home builders who sell from plans
- Remodelers and architects showing clients a layout
- Makers working from part drawings
How to set it up
- Time to Set Up
- About 30 minutes (our estimate)
- Difficulty
- Beginner
- Tools Needed
- Grok Bot: Grok Bot account needed
- A clear 2D drawing: PDF or image of the plan
- Read the bot page to confirm it fits your drawings.
- Add it to Grok Bot from the official share link.
- Upload one clear plan you know well.
- Compare the 3D model and quantities with the real drawing.
- Share the preview with a client once it matches.
Plan to 3D Install Guide
Plan to 3D reads a flat drawing and gives back something you can turn around on screen. Upload a floor plan, a site plan or a part drawing, and it builds a 3D model you can open and rotate, a preview image to share, and approximate quantities for early budgeting.
Builders use it to help buyers understand a layout before anything is built. Remodelers and architects use it to walk a client through a change. Makers use it to check a part from its profile drawing.
Accuracy follows the drawing. A clean, labelled plan gives a better model than a phone photo of a sketch. The quantities are rough, so treat them as a first look, never as a takeoff or an order list.
- Install Path
- Official share link. Choose Get it on this page, then press Add to Grok Bot on the official x.ai page and read the terms it shows before you accept.
- Price Tier
- Free to add from the share link. You need a Grok Bot account.
- Connectors
- None beyond Grok Bot. You upload the drawing as a PDF or image.
- Difficulty
- Beginner
- Time to Set Up
- About 30 minutes (our estimate)
- Creator
- @krish1403
Worked Example: Showing a buyer a plan they cannot picture
Example only: an illustration of how a session could go, not a real client, case or result.
- A buyer is unsure about an open-plan layout from your standard home range.
- You upload the clean PDF floor plan for that home.
- Plan to 3D returns a model and a preview image of the ground floor.
- You compare room sizes with the drawing and correct one wall the bot misread.
- You send the buyer the preview, labelled as an illustration, not a construction document.
Run It With Us
Get It Set Up For You
Short on time? We can set up Plan to 3D on your own accounts, test it with you and hand it over working.
- $1,500 founding price for the first 3 setups (normally $2,500). $300 deposit, counted toward it.
- We never ask for your passwords
- Bots draft, you approve
Ask a question first · See how Run It With Us works · No promise of income or results (disclaimer).
Original source
Found via x.aiUsed in
Results to Expect Our rough estimate of value to the business, not a promise or income claim
- Clients and buyers can see a layout in 3D instead of reading a flat plan. Quality depends on how clear the drawing is.
- Quantities are rough and not a substitute for a takeoff.
Our estimate, not a promise or a typical result. Results depend on your effort, skills, market and costs.
Tips and pitfalls
- Use quantities only as a starting point; measure before you order.
- Label the model as a preview, not a construction document.
- Share plans only when you have the rights to them.
Questions
Can I build from the Plan to 3D model?
No. Treat it as a preview. Build only from your approved, stamped drawings.
Is Plan to 3D free to use?
It is free to add from the share link, but you need a Grok Bot account.
Which drawings work best?
Clear, labelled 2D drawings such as floor plans, site plans and part profiles. Blurry photos or hand sketches give weaker models.
How accurate are the quantities?
They are approximate and meant for early estimates. Measure and do a proper takeoff before you order anything.
How long does it take to set up Plan to 3D?
Our estimate is about 30 minutes for a first plan, including checking the model against the drawing.
Related links
Listed on Money With AI badge
Creators can show this listing on their own site or README.
<a href="https://moneywithai.net/bots/plan-to-3d/"><img src="https://moneywithai.net/badge/plan-to-3d.svg" alt="Listed on Money With AI" width="196" height="28"></a>
[](https://moneywithai.net/bots/plan-to-3d/)
Browse all Client Services bots.
Related guide: Grok Bot Templates